Cutting machine needs to complete the maintenance work every week

1. In the process of using the CNC cutting machine, in addition to the daily maintenance work, a large repair and maintenance is required every week. Every week, a comprehensive cleaning of the mechanical equipment is required. The guide rails, the longitudinal guide rails, and the transmission rack and pinion are all cleaned, and then the lubricant is added after cleaning.

2. Check whether the horizontal rail and the longitudinal rail can work normally. If the working process is not normal, then it must be replaced in time.

3. Check all the torches every week to see if it is loose. If it is loose, tighten it.

4. If any garbage is found at the ignition gun, it must be cleaned in time to ensure that it can be ignited normally when cutting.

5. If the CNC cutting machine has a device that automatically adjusts the height, then the device that automatically adjusts the height is checked every week to see if it is sensitive, and it is not necessary to replace the probe.

The CNC cutting machine wants to ensure that it can run well during the running process, and in the process of cutting the plate, the cutting efficiency is relatively high, and the cutting quality is better, then the mechanical equipment should be repaired every day. In addition to maintenance, a major maintenance is required every week.