-
How to choose the right plastic welding machine equipment
27 Dec 2019There are two general methods of plastic welding: bonding and welding. Generally speaking, the bonding process has low production efficiency, is not beautiful, and the adhesive has certain toxicity; while the welding process is relatively high in pro...
-
Main functions of automatic hot melt welding machine
20 Dec 2019Full-automatic hot-melt welding machine is a very important equipment in welding operations, especially the widespread use of PE pipes in modern society, it seems that the role of hot-melt welding machines is more important. As we all know, PE pipes ...
-
Main functions of automatic hot melt welding machine
14 Dec 2019Full-automatic hot-melt welding machine is a very important equipment in welding operations, especially the widespread use of PE pipes in modern society, it seems that the role of hot-melt welding machines is more important. As we all know, PE pipes ...
-
How to use PPR welding machine
06 Dec 20191. Fix the fuser and install the heating tip, place the fuser on the rack, install the corresponding heating die according to the required pipe specifications, and tighten it with the internal hexagon, which is generally small at the front end. 2. ...
-
Advantages of IF welding machine
28 Nov 2019The intermediate frequency welding machine has the advantages of the above two aspects, so its welding quality control is far superior to the industrial frequency spot welding machine. However, its disadvantage is that the price is 6-8 times higher t...
-
Hot melt machine welding process introduction
23 Nov 2019The hot melt machine is divided into small hot melt machine, medium hot melt machine, multi-function hot melt machine and other hot melt machine products. The hot melt machine transfers the heat of the heating plate to the upper and lower plastic hea...
-
Spot welder working principle
15 Nov 2019The process of spot welding is to open the cooling water; the surface of the weldment is cleaned and assembled accurately, and then fed between the upper and lower electrodes, and the pressure is applied to make the contact good; the contact between ...
-
How to repair the fault of electric hot melt welding machine
08 Nov 2019First of all, let's take a look at the first problem of electric hot-melt welding machine. If the power is not connected, why not power it? That is the problem of burnout or power interface. How to solve this problem, we need to replace the accessori...
